Hello everyone! Today we’re going to be taking a look at universal remote codes for old/classic tv. If you’re curious to know about how do you program a universal remote to an old tv? then make sure to check out this full length article on it. So without any further ado let’s get started our today’s episode.
From this article you will be getting about where can you find your urc code? and will universal remote work on old tv? etc. The methods and the codes are given below. Make sure to use those codes in order to program your device with your favorite universal remote control. Here we go.
Universal Remote Control Code List
You can check out different universal remote codes such as 5 digit, 4 digit universal remote codes and 3 digit universal remote codes. First we will go with the tv remote codes list.
- Mixed Classic TV codes from seven brands of universal remote controls.
From the below mentioned classic tv codes you can pair your devices like comcast, dish, ge, oneforall, philips, spectrum and u-verse.
3 digit codes: 659, 412, 229, 214, 401, 042, 092, 019, 030, 056, 067, 043.
4 digit codes: 0499, 0214, 0401, 0042, 1941, 0191, 4841, 1891, 0057, 0119, 0526, 0023, 0741, 0805, 5006, 5010, 5020, 5024, 5081, 5184.
5 digit codes:
11984, 11903, 18918, 19411, 18443.
- Mixed Classic DVD codes from seven brands of universal remote controls.
From the below mentioned classic dvd codes you can pair your devices like dish, ge, oneforall, philips, rca, spectrum and u-verse.
3 digit codes: 695, 826, 882, 401, 431, 623, 095.
4 digit codes: 0730, 1730, 1917, 0431, 1051, 0401, 1245, 1275, 1965, 0757, 1757, 2035, 2174, 2101, 2391, 3433, 0744, 1706, 0741, 6125, 6147, 6248, 3361, 2076.
5 digit codes: 54104, 52418, 52715, 59619, 55401.
- Mixed Classic VCR codes from two brands of universal remote controls.
From the below mentioned classic vcr codes you can pair your devices like ge, oneforall.
3 digit codes: 037
4 digit codes: 6372
- Mixed Classic Cable codes from a single brand of universal remote control.
From the below mentioned classic cable codes you can pair your devices like oneforall.
4 digit codes: 1284
- Mixed Classic SAT codes from two brands of universal remote controls.
From the below mentioned classic sat codes you can pair your devices like oneforall, Philips.
4 digit codes: 1291, 1284, 1672, 1304, 0133, 1699.
- Mixed Classic Audio codes from five brands of universal remote controls.
From the below mentioned classic audio codes you can pair your devices like directv, dish, ge, philips, spectrum.
3 digit codes: 819, 802.
4 digit codes: 1379, 1352, 7108.
5 digit codes: 31352, 21352.
From all of the listed codes you can also try them for your favorite universal remote codes for old tv samsung tv.
How do i Match My Remote To My TV?
Basically any branded universal remote control could make watching TV, listening to your favorite music and even playing different types of video games even more manageable simply by combining the different and multiple remotes into single. Now you can get to know the top three instructions to program a universal remote: In case if you would like to read rm-014s+ universal remote codes.
How to Find TV Code for Universal Remote
Before going to program any of your favorite universal remote control you need to turn your device on in your first step and also check out the batteries whether working or not. After all these check ups you need to check out the below step by step instructions and can program your remote with your favorite devices. Let’s get started.
how to program any remote to a tv without codes
This method name is known as auto-programing popularly known as auto code search. This make you to program your universal remote control without requiring any additional information, like remote codes. To auto-program your remote, you can follow below steps:
- You should point your universal remote control before your device that you want to operate to.
- Then you can tap and release the right device button on your remote control for the device that you would like to program with. For an instance, if you’re pairing to a TV, press the TV button.
- After this you have to tap on power button and device button together. You need to hold till the power light on the device turns off and then back on.
- Now you have to tap and release play button and then wait for 5 seconds to check if the device you’re pairing to turns off. If it so, you caught the correct code. If not, you must repeat the procedure. The remote shall try a new set of codes every time you hit the play button, so make sure to give it a chance to cycle through them all.
- Then you have to tap and leave the reverse/rewind button. This should turn the device back to on mode. If not, repeat the procedure until it finds the correct code.
- Then tap the stop button so that in can save the code.
Test out different functions on your remote control to make sure they are working correctly and then start using your remote control.
Direct code entry
If you would like to connect your tv, dvd, vcr, dish or any device with your favorite universal remote control then there is another way unlike the auto-programing method. But this method needs the exact and correct code to be enrolled for each device. Some devices might have a code sheet on them that you can reference, or you can find device codes by searching online.
- Tap and hold the needed device button (TV, for example). The power light on the remote should light up. Continue to tap the device button.
- Here you need to enter the correct code for your device while continuing to tap the device button. Continue holding the device button even when the power light turns off.
- Once the power button lights up again, you can release the device button. You’ve entered the correct code and can start using your remote for that device.
- Repeat the procedure for each of your device that you want to control with your universal remote control.
Whatever the remote control you use like universal remote codes for old tv lg tv, or any other brand devices you must need their codes in order to follow the above steps. You can also check out ge universal remote codes.
Brand code search
Suppose, you do not have access to a specific code for any of your devices then brand code search is an another chance to program your remote control. If you want to check out the codes by brand like one for all remote code search then make sure to check out the below steps. The above two methods are different from this method, if you want to use this method then make sure to be aware of your brand name of the devices first. The steps are mentioned in the belw lines. You may also like to read one for all tv remote codes.
- Press and hold the appropriate device button (TV, for example).
- While continuing to hold the device button, press and hold the power button on the remote. The power button should light up.
- Release the power and device buttons at the same time. The device should remain on. If not, repeat the previous steps.
- Using the universal remote’s number pad, enter the brand code.
- Press and release the power button on the remote a few times until the device turns off.
- Once the device turns off, press the stop button to save the code. If the device you’re connecting to does not turn off, you’ll need to try another programming method or verify that you’re using the correct brand code.