Hey everyone! today we’re going to be taking a look at how to program a universal remote to a viore tv by using the codes. So if you are one of the users of this tv and want to pair it with your all in one universal remote control then bare with us and we will provide you how to connect with your favorite universal remote control by using the step by step instructions and codes. So without any further ado let’s get started.
Let us tell few words about benefits of universal remote controls. The good thing is using these remotes is you can utilize it like an alternative to your viore tv if your viore tv remote not working or damaged. Of course not only that, you can even use same remote for programming your different devices such as DVD player, Cable Box and Satellite with one remote.
If you’d like to use the remote on your viore tv, then you must need to program or connect the both of them together. Of course it’s an onetime work to do. In the procedure of pairing your universal remote to the viore tv, you need to have the Viore TV Universal remote codes. From this blog post you can get all of them.
5-Digit Viore TV Universal Remote Codes
- 10960
- 18326
- 13382
- 12352
- 18424
- 12278
- 11811
- 12279
- 12087
- 13159
- 11684
- 13094
- 12104
- 16836
- 12104
- 13429
- 13382
4-Digit Viore TV Universal Remote Codes
1684, 3094, 1457, 3382, 1032, 1403, 1018, 2831, 5442, 1018, 4829, 1435, 5428, 1032, 4829, 3118, 2104.
3-Digit Viore TV Universal Remote Codes
- 907
- 012
- 516
- 915
- 203
- 913
- 177
- 666
- 529
- 542
- 601
- 505
- 738
- 573
- 524
Viore TV codes for Comcast universal remote controls:
5 digit codes (XR2, XR5, XR11, XR15):
11207, 13382, 11684, 12352, 12278, 13118, 12279, 12104, 13094, 12496, 11811, 13154, 11361, 11531.
5 digit codes (Digital Adapter Remote):
11207, 11684, 11811.
5 digit codes (Spectrum & Tracer):
11207, 11684, 11811, 12104, 12087.
Viore TV codes for DirecTV universal remote controls:
5 digit codes (RC6x):
11207, 11684, 11811, 12104, 12352, 13094, 13382, 13118, 13159.
Viore TV codes for Dish Network universal remote controls:
3 digit codes (20.1-21.1):
738, 907, 915, 601, 516, 542, 529, 524, 505, 666, 337, 455, 913, 573, 627, 704, 942, 322, 506, 612, 522, 500, 669.
3 digit codes (20.0-21.0):
738, 907, 516, 915, 505, 573, 601, 542, 942, 627, 529, 704, 524, 522, 666, 322, 337, 500, 506, 455, 669, 913, 612, 596, 911.
3 digit codes (1.5 Blue Button):
012
3 digit codes (Basic):
683, 177, 907, 203, 242.
4 digit codes (40.0, 50.0, 52.0, 54.0):
2352, 1207, 1684, 3429, 2104, 3382, 3094, 3118, 4829.
Viore TV Codes for GE Universal Remote:
4 digit codes (V1):
1018
4 digit codes (mixed V2/V4):
5347, 5428, 5442.
4 digit codes (V2):
5347, 5428, 5442.
4 digit codes (V4):
5347, 5428, 5442.
4 digit codes (mixed V3/V5/CL3/CL4/CL5/CL6):
5431, 1421, 1881, 2831, 2141, 2841, 3681.
4 digit codes (V3):
2831, 2841, 3681.
4 digit codes (V5):
5431, 2831, 2841, 3681.
4 digit codes (CL3):
5431, 1421, 2831, 1881, 2841, 2141, 3681.
4 digit codes (CL4):
5431, 1421, 1881, 2141, 2831, 2841, 3681.
4 digit codes (CL5):
5431, 1421, 1881, 2141, 2831, 2841, 3681.
4 digit codes (CL6):
5431, 1421, 1881, 2141, 2831, 2841, 3681.
Viore TV codes for OneForAll universal remote controls:
Smart Control 8 US (URC7880):
3382, 2352, 3429, 3118, 3094, 2104, 2496, 4829, 1684, 3159, 1207, 3154.
Contour series (URC12x9_Lat_Am):
3382, 2104, 3094.
Essence series (URC73x0_Lat_Am):
2104.
Essential series (URC36x0) US/CA:
3382, 2352, 3118, 2104, 3429, 3094.
Simple TV (URC6419_Lat_Am):
2104
OFA Streamer (URC7935):
34465, 25631.
OFA 8 (URC2781_Lat_Am):
2104, 3382.
Older 4 digit codes:
1207, 1684.
5 digit codes:
11684, 12104, 12352.
Mixed 4 digit codes:
3382, 2352, 3429, 2104, 3118, 3094, 2496, 4829, 1684, 1207, 3159, 3154.
Four and five digit Viore TV codes for Philips universal remote controls:
4 digit codes (v.2):
1403
4 digit codes (mixed CLx):
5431, 1421, 1881, 2831, 2141, 2841, 3681.
4 digit codes (CL4):
5431, 1421, 1881, 2141, 2831, 2841, 3681.
4 digit codes (CL5):
5431, 1421, 1881, 2141, 2831, 2841, 3681.
4 digit codes (new CL6):
5431, 1421, 1881, 2141, 2831, 2841, 3681.
5 digit codes (/27):
10960, 14352, 18326, 14216, 18424, 18810, 16836, 11422.
Viore brand code:
3192.
Four and five digit Viore TV codes for RCA universal remote controls:
4 digit codes (v.4):
1684, 2352, 2104, 3382, 3118, 3094, 1207, 3154.
5 digit codes (v.1):
12352, 13382, 13118, 12104, 13094, 11684, 13154.
Viore TV codes for Spectrum universal remote controls:
3 digit codes:
472, 055, 592, 578, 229, 258, 192.
3 digit codes (Synergy V):
031, 599, 601, 602.
4 digit codes:
1207, 3382, 2352, 1684, 2104, 3094, 3154, 2051, 2397.
4 digit codes (Philips RC122):
1118, 1217, 1325, 1386.
4 digit codes (Cisco DTA):
3961, 0411, 3991, 3631, 0901, 1251.
5 digit codes:
11207, 13382, 12352, 11684, 13118, 12104, 11811, 13094, 12496, 13159, 13154, 12051, 11714, 14105, 12397.
Four and five digit Viore TV codes for AT&T U-verse universal remote controls:
4 digit codes (S10):
1031, 1032, 1457.
5 digit codes (S20):
12352, 13382, 13429, 12104, 13094, 11684, 11207.
4 digit codes (Silver):
1435, 1197.
4 digit codes (A10):
1018
5 digit codes (A30):
12352, 13382, 13429, 12104, 13094, 11684, 11207, 13154.
Viore DVD codes for DirecTV universal remote controls:
5 digit codes (RC6x):
22553
Viore DVD codes for Dish Network universal remote controls:
4 digit codes (40.0, 50.0, 52.0, 54.0):
2553
Viore DVD codes for OneForAll universal remote controls:
Essence series (URC73x0_Lat_Am):
2300
OFA 8 (URC2781_Lat_Am):
2300, 2553.
5 digit codes:
32553
Mixed 4 digit codes:
2300, 2553.
Four and five digit Viore DVD codes for RCA universal remote controls:
4 digit codes (v.4):
2553
5 digit codes (v.1):
32553
Viore DVD codes for Spectrum universal remote controls:
5 digit codes:
22553, 22580.
Four and five digit Viore DVD codes for AT&T U-verse universal remote controls:
4 digit codes (Silver):
2502, 2508.
5 digit codes (A30):
22553
How to Program a Universal Remote to a Viore TV
Now you have the universal remote codes for your viore tv. But if you do not know how to program your viore tv with the all in one remote then make sure to check out the below instructions and you can successfully pair with any device and use them with one single remote controller. So why late just look at the steps below.
- First of all turn on your TV set that you want to program.
- After that hold your universal remote control by facing towards your TV or Device.
- Find out the TV button on your universal remote. Click on the “Setup” option now. In case if the remote control would enter the Learning Mode.
- Find out the codes which works with your device brand using the list of code listed above.
- If you’ve got the right procedure, then there is a tiny light shall blink for 4 times. Whenever it does, then you can pick any of the codes mentioned above to enter for your device. Of course the button light shall go to off mode once you get the correct code. If not, try with another code with same steps.
- Finally click on any of the functions keys on your remote control. If the remote functioning properly, that means you got the correct steps. If it doesn’t work, repeat the steps and try with another code.
How to Program Viore TV Without Remote Codes
If you do not have the proper working codes or if you do not know the codes yet then do not worry about anything. Here we’re going to be tell you how to pair your device without using the codes just by using the auto code search method. In this method any universal remote control shall go into the scanning procedure. Look at the procedure below how it scans one code simultaneously which should be paired with your device and then work with it properly.
- In the first step you have to switch on the “smart device” that you would like to use. In this example, it is the TV.
- Now turn your remote on and then click on device button that you want to use such as; TV, DVD, CBL, and OK/SEL, for about at least three seconds. Here an LED light on your remote will blink to indicate when the device has been all set to be prepared to program.
- After that, face your remote towards the device and then tap on the CH+ and CH- buttons. Now the remote shall show on and off signals. After that, click on the up and down key repeatedly until your device turns itself off.
- Then make sure to verify the code by tapping the power button. And then the device shall turn itself on. Once the device starts, try to switching and changing the channels to make sure that the remote has been programming in a right way.
- Finally click on the device button on the remote and then save the code. The LED of the device will blink two times to confirm whether the code is stored or not.
How do i Program My Viore TV Universal Remote?
There are two more methods left if you’re facing this why won’t my universal remote program to my tv? issue. They are one is manual method, and another one is code search method. So try with these methods if you couldn’t pair with the above given method in case.
Manual Method
If you’d like to know how do i pair my viore tv? then this viore tv manual method helps you a lot. Actually by using the desired code shall help to pair your viore universal TV remote. So that, by using the key code you can simply and in an easy way program your universal remote. Of course the necessary code also identifies the make and the model of the devices in use. The steps are given below.
- To begin with this method, you have to switch your device on
- After that tap TV button on the viore tv Universal Remote
- In the next step, press and hold setup button of your viore tv universal remote until you observe the light blinking. The blinking light indicates that the remote has entered into learning mode.
- Now here you have to enter the key code mentioned in the programming guide or the instructions booklet.
- After the procedure, face your remote towards the TV and press and hold the power button.
- In the final step, you can release the power button as soon as the screen will be switched to off mode.
After all of these steps, the device shall be started working correctly. Suppose, the device is getting any interruptions or not working correctly, you can pair and setup the viore tv remote control again with the same steps just by using a different code from the above-listed principles.
With Code Search
Viore tv remote programming with code search……If you’re unable to find out the key code, that can fit to your viore tv universal remote code and works properly, then you could easily set up your viore tv universal remote control by using the search mode method. You can even find out this code in the manual instructions booklet, which forces the remote to go into search mode automatically after that.
- To begin the procedure you have to make sure turn your device on.
- Then press and hold setup button on your viore tv universal remote
- Here you need to enter the 9-9-1 three-digit codes.
- Tap on power button on your remote and then press the ch+ button until the device in question turns off automatically.
The viore tv remote control manual and also this pairing method using the code search method is a little long and takes some extra time. Once you have done all these steps and done the above procedure, your remote is now being ready to use.
Wrap Up
We hope this article has been given you the best answers on how to program universal remote to tv (viore tv). If you feel this article helped in whatever you’re searching for and you’d like to share this article with your colleague and friends who are waiting for this type of article then we highly recommend you to share it and spread it around the world. If you have any comments, concerns, questions or any other words to say about our website then please feel free to write them down beneath in the comment section.