PAVY Universal Remote Codes

Hello everyone! Do you to pair your device with your latest all in one remote control! then do not worry this website is all about programming your favorite universal remote controls with any devices that you would like to operate with. So today from this article we are going to be going over how to program pavy universal remote. So without any further ado let’s get started our today’s episode.

Pavy universal remote codes

Do you know the exact procedure about how to connect a pavy universal remote by using the different codes for various devices like LG, insignia, vizio, samsung, element tv…etc. Of course through this particular article we are going to be showing you all those pavy universal remote codes and of course you can easily grab them all with the help of below table.

Per suppose if you do not know how to program pavy universal remote codes for your device then make sure to try out with the below given methods and after that you can operate your device in an easiest way. If you find any of the codes that are mentioned in the below list are not working for your device then do not worry just try with an another code and another code and another until you get  a correct code to be connected.

But in case if you don’t want to search in that way or if you have tired off with the searching procedure then you can use our without codes method. So let’s get started with this method first.

How do i Program my Pavy Device Without a Remote Code?

If you do not find universal codes for remotes like pavy remote then you must think like oh my god how better it would be if it wasn’t require any codes to be programmed and operate your device with the universal remote. Then proceed with our below mentioned steps which can lead your device to connect with your favorite pavy universal tv remote that too not requirement of any codes. So if you like this idea then without any further ado let’s get started our step by step procedure from the below list.

  1. To begin this method, you have to switch on the “smart device” that you would like to use. In this example, it is the Pavy.
  2. Now turn your remote on and then click on device button that you want to use such as; TV, DVD, CBL, and OK/SEL, for about at least three seconds. Here an LED light on your remote will blink to indicate when the device has been all set to be prepared to program.
  3. After that, face your remote towards the device and then tap on the CH+ and CH- buttons. Now the remote shall show on and off signals. After that, click on the up and down key repeatedly until your device turns itself off.
  4. Then make sure to verify the code by tapping the power button. And then the device shall turn itself on. Once the device starts, try to switching and changing the channels to make sure that the remote has been programming in a right way.
  5. Finally click on the device button on the remote and then save the code. The LED of the device will blink two times to confirm whether the code is stored or not.

With these steps the pavy universal remote manual setup has been done. But in some cases this procedure might not work for every device in that cases you must proceed with codes. So do you know how to get a code for universal remote then do not worry if you don’t here are our simple steps to operate your device without any interruptions. So check out our universal clean remote setup. First of all let’s have a look at the codes and use them one by one until we get paired with our device.

Pavy Universal Remote Codes for LG TV

  • 619
  • 700
  • 910

What Are The Codes for Universal Remote

Admiral500, 501, 610, 614, 615,902
Advent911, 932, 933
AOC103, 601, 617
Apex000, 604, 618
Audiovox100, 101, 900, 901
Bell&Howell611, 620
Broksonic614, 902
Candle601, 619
Citizen601, 619, 900, 903
Contec103, 901
Crosley301, 303
Curtis Mathes100, 102, 301, 400, 401, 402, 405, 500, 603, 606, 611, 619, 620, 621, 903
Daewoo100, 101, 617, 900
Dumont617, 700
Durabrand201, 614, 615, 914, 918
Electroband103, 605
Emerson101, 103, 200, 201, 620, 901, 902
ESA201, 601, 901, 903
Fisher620, 801
Fujitsu300, 615
Funai201, 615, 901
GE100, 200, 202, 400, 401, 402, 405, 607, 608, 802
Gibralter601, 617, 700
Goldstar601, 607, 617, 619
Grundy615, 901
Haier914, 918
Hitachi005, 606, 611, 916, 619
ILO921, 925
Insignia201, 301, 303, 614, 909, 919, 920, 934
JBL000, 301, 604, 618
JC Penny202, 400, 402, 405, 601, 607, 608, 609, 617, 800, 903
Kenwood601, 617
KTV103, 601, 901
Konka001, 002, 003, 304, 904
LG619, 700, 910
LXI301, 400, 402, 607, 609, 620
Magnavox301, 302, 303, 601, 615, 617, 803, 905, 906, 907, 908, 909
Marantz301, 601
Megatron606, 607
Memorex004, 104, 607, 611, 614, 615, 620
MGA104, 500, 601, 607, 617
Mitsubishi104, 500, 601, 607, 617
Motorola500, 802
MTC103, 601, 617, 619, 903
NAD603, 607, 609
NEC601, 617, 619
Nikko601, 607, 900
Optimus004, 603, 620
Optonica500, 610
Orion614, 615, 902
Panasonic004, 202, 610, 802
Philips301, 601, 617, 803, 905, 906, 907, 908, 909
Philco301, 601, 606, 614, 617
Pilot601, 617
Pioneer600, 603
Polaroid400, 910, 913, 915, 917, 920
Portland617, 900
Proscan400, 402
Proton102, 607
Pulsar617, 700
Quasar004, 202, 610, 802
RadioShack400, 402, 607, 610, 617, 619, 620, 621, 901
Roomconx614, 615, 902, 924
Runco601, 616, 700
Samsung601, 607, 617, 619, 903, 930
Sansui614, 615, 902
Sanyo620, 801, 931
Scott607, 615, 617, 901, 902
Sears201, 301, 400, 402, 607, 609, 615, 620, 622, 801
Sharp500, 501, 610, 929
Sharp (LCD)500, 501, 610, 929
Soundesign607, 615, 901
SSS617, 901
Sylvaina201, 301, 601, 901
Symphonic201, 901
Technics004, 202
Techwood202, 619
Teknika104, 301, 605, 611, 615, 617, 619, 900, 901
TMK602, 607, 619
Toshiba609, 613, 620, 903
Vidtech607, 617
Wards301, 601, 607, 608, 610, 611, 615, 617, 619
Westinghouse926, 928
White Westinghouse101, 605, 614
Yamaha601, 617
Zenith611, 614, 619, 700, 900

How To Program a Universal Remote Control With PAVY TV

  • First of all turn on your pavy tv set that you would like to program.
  • Now hold your pavy universal tv remote In the opposite direction to face your tv or device.
  • Then find out the “TV” option upon your universal remote control. Now tap on “Setup” option. So now the remote control shall be entered into the “Learning Mode”.
  • Now find out the codes from the above given table that actually helps to pair with your device brand.
  • If you’ve got the procedure correct finally, here a tiny light shall blink for about four times. Whenever it blinks in that way, you have to pick any of the above codes for your device and then enter it.
  • Once you get the correct code the button light goes off. But in case if it doesn’t happen they make sure to try with an another code again with the same steps.
  • Now click on any of the functions keys on your universal remote control. If it works properly, then it means you’ve got the correct steps. But in case if it doesn’t work, you have to repeat the above steps and also try with another code.

How To Program Your Pavy Universal Remote With Remote Code Search

If you’d like to know the answer for how to get a universal tv remote to work with the remote code search method then the below steps are very much helpful for you. If you do not want to have a stress of finding codes for your devices at that moment you can program your universal remote by using the search code option. So without any delay let’s get start with the below steps.

  • To begin the procedure you have to make sure turn your device on.
  • Then press and hold setup button on your Pavy universal remote
  • Here you need to enter the 9-9-1 three-digit codes.
  • Tap on power button on your remote and then press the ch+ button until the device in question turns off automatically.

The universal remote for Pavy manual and also this pairing method using the code search method is a little long and takes some extra time. Once you have done all these steps and done the above procedure, your remote is now being ready to use.

Manual Method

If you’d like to know how do i pair my Pavy tv? then this Pavy tv manual method helps you a lot. Actually by using the desired code shall help to pair your Pavy tv remote. So that, by using the key code you can simply and in an easy way program your universal remote. Of course the necessary code also identifies the make and the model of the devices in use. The steps are given below.

  1. To begin with this method, you have to switch your device on
  2. After that tap TV button on the Pavy tv Universal Remote
  3. In the next step, press and hold setup button of your Pavy tv box universal remote until you observe the light blinking. The blinking light indicates that the remote has entered into learning mode.
  4. Now here you have to enter the key code mentioned in the programming guide or the instructions booklet.
  5. After the procedure, face your remote towards the TV and press and hold the power button.
  6. In the final step, you can release the power button as soon as the screen will be switched to off mode.

After all of these steps, the device shall be started working correctly. Suppose, the device is getting any interruptions or not working correctly, you can pair and setup the Pavy tv remote control again with the same steps just by using a different code from the above-listed principles.

Wrap Up

We hope this article has been given you the best answers on how to program universal remote to tv (Pavy tv). If you feel this article helped in whatever you’re searching for and you’d like to share this article with your colleague and friends who are waiting for this type of article then we highly recommend and appreciate your contribution to share it and spread it around the world. If you have any comments, concerns, questions or any other words to say about our website then please feel free to write them down beneath in the comment section.

Leave a Reply

Your email address will not be published. Required fields are marked *