Sharp Acquos Blu-Ray Player Universal Remote Codes

Sharp Aquos is one of the most following tech giant device throughout the world. But when you want to use this device through the other remote like universal then what do you do. Here is our latest and updated tutorial on this programing method and sharp aquos blu-ray player universal remote codes. So why late let’s simply pair your favorite device with this remote by using the codes and pairing procedure from the below lines.

Sharp Aquos Universal Remote Control Codes


In this article we’ve provided almost all of the sharp aquos remote codes. So if you’re curiously waiting for those codes to be paired to with your device then don’t worry just check the below codes and enter them as per the below programing methods. So that you can easily pair without any errors or interruptions. There are 3 digit and 4 digit codes.

If you find any one of the codes are not working then try out with an another code until you get programmed perfectly with your device and remote each other. If you’d like to ask us anything else then leave your thoughts, questions, comments or concerns through the below comment section. So for now without further ado let’s get started.

But if you don’t find any working code from the below list then use the below method that we’ve given for programing your device with the universal remote without codes.

How do i Program my Universal Remote to my Sharp Aquos TV Without Codes?

Thorough the below auto search method,any type of universal remote control you use that should go through scanning mode in the remote. It usually scans a code simultaneously in order to find out a correct remote code which is programmed and works with your remote for programed to be control. You can proceed with the below instructions.

  1. In the first step you have to switch on the “smart device” that you would like to use. In this example, it is the TV.
  2. Now turn your remote on and then click on device button that you want to use such as; TV, DVD, CBL, and OK/SEL, for about at least three seconds. Here an LED light on your remote will blink to indicate when the device has been all set to be prepared to program.
  3. After that, face your remote towards the device and then tap on the CH+ and CH- buttons. Now the remote shall show on and off signals. After that, click on the up and down key repeatedly until your device turns itself off.
  4. Then make sure to verify the code by tapping the power button. And then the device shall turn itself on. Once the device starts, try to switching and changing the channels to make sure that the remote has been programming in a right way.
  5. Finally click on the device button on the remote and then save the code. The LED of the device will blink two times to confirm whether the code is stored or not.

What are the Codes for a Sharp Aquos TV?

As we mentioned in the above paragraphs there are two types of codes to be used for connecting your sharp aquos tv with the universal remote control. So keep trying the below codes until it programed/until you find a correct code. Let us check the codes below now.

4 Digit Code for Sharp Aquos TV

  • 0679, 0689, 2250, 0397, 0897, 0908

3 Digit Code for Sharp Aquos TV

  • 206, 207, 222, 226, 227, 234, 239, 242, 246, 248, 254, 266, 268, 273, 274, 275, 280, 285, 287, 300, 340, 341, 360, 361

How do i Connect my Sharp Aquos Remote to My TV? (Manual Method)

If you’d like to know how do i pair my sharp aquos blu-ray player? then this manual method helps you a lot. Actually by using the desired code shall help to pair your sharp aquos blu-ray universal TV remote. So that, by using the key code you can simply and in an easy way program your universal remote. Of course the necessary code also identifies the make and the model of the devices in use. The steps are given below.

  1. To begin with this method, you have to switch your device on
  2. After that tap TV button on the sharp aquos blu-ray player Universal Remote
  3. In the next step, press and hold setup button of your sharp aquos blu-ray player universal remote until you observe the light blinking. The blinking light indicates that the remote has entered into learning mode.
  4. Now here you have to enter the key code mentioned in the programming guide or the instructions booklet.
  5. After the procedure, face your remote towards the TV and press and hold the power button.
  6. In the final step, you can release the power button as soon as the screen will be switched to off mode.

After all of these steps, the device shall be started working correctly. Suppose, the device is getting any interruptions or not working correctly, you can pair and setup the sharp aquos blu-ray player remote control again with the same steps just by using a different code from the above-listed principles.

Code Search

sharp aquos remote programming with code search……If you’re unable to find out the key code, that can fit to your sharp aquos blu-ray universal remote code and works properly, then you could easily set up your sharp aquos blu-ray universal remote control by using the search mode method. You can even find out this code in the manual instructions booklet, which forces the remote to go into search mode automatically after that.

  • To begin the procedure you have to make sure turn your device on.
  • Then press and hold setup button on your sharp aquos blu-ray universal remote
  • Here you need to enter the 9-9-1 three-digit codes.
  • Tap on power button on your remote and then press the ch+ button until the device in question turns off automatically.

The sharp aquos blu-ray remote control manual and also this pairing method using the code search method is a little long and takes some extra time. Once you have done all these steps and done the above procedure, your remote is now being ready to use.

Wrap Up

That being said guys! we hope you find this article very helpful. If you had benefit from this article and you feel worth to share this article with your friends and other sharp aquos blu ray dvd player users then proceed to share with them and support us to reach this information as much as many people around the world. We accept all of your suggestions into consideration about any other universal remote control codes and of course if you have any other sharp aquos blu-ray player universal remote code then mention that code in the below comment section. Thank you for being our website visitor.

Leave a Reply

Your email address will not be published. Required fields are marked *