Hello universal remote users of all brands and devices! Welcome to my website and thank you so much for checking out the today’s article. In this article we’re going to be taking a look at the Ilive sound bar code for universal remote. That’s right we’re finally doing it guys. I know a couple of you’ve been asking me for this…well here it is.
From this article we’re going to let you know how do i connect my universal remote to my soundbar by using the codes such as there digit, four digit and five digit codes. But mainly this device needs to use four digit codes. If you’re facing ilive sound bar remote not working issue then make sure to check out our step by step guidance on to connect with it. So without any further ado let’s get started with the codes and their programming steps.
If you’re seriously searching for the Ilive Soundbar universal remote codes to connect with the player! then this post will be a really helpful one for you. A reasonable number of codes have been mentioned for ILIVE Soundbar listed below. Of course we’ve given you more than a code for each of your devices. But if you couldn’t connect with one of the below codes then make sure to try out with an another code. Of course here mainly the four digit code works for this model.
Mainly whenever it comes for the soundbars, the Ilive is one of the most popular Soundbar brands in the present tech market. Basically an Ilive Soundbar comes up with a remote control. But in case if any of the reasons you’re unable to control your soundbar by using your device, at that time you can use a universal remote to program the Soundbar.
The main task here is to know how to program your universal remote control to work with your Ilive Soundbar before you can use the code. However the guide on this how to connect an Ilive Soundbar with a universal remote control has also been mentioned below. First of all let us look at their codes and then go for the step by step guidance on how to connect.
5 Digits Universal Remote Codes For ILIVE SOUNDBAR
4 Digits Universal Remote Codes For ILIVE SOUNDBAR
3 Digits Universal Remote Codes For ILIVE SOUNDBAR
How To Program Universal Remote Control For ILIVE SOUNDBAR
- First of all turn on your ILIVE SOUNDBAR set.
- After that hold on universal soundbar remote towards your Ilive Soundbar you want to program.
- Now find out the “Menu” option on your universal remote control. Then tap on to the ‘Settings’ option and then tap on “program remote” after that click on “SOUND” or any device that you would like to program.
- If you’ve got your procedure correct, then a tiny light shall blink for about four times. But whenever it does, you can pick any of the codes that are provided above that are suitable for your device and then enter. Of course the button light shall go off once you are got the correct code. If not, try out with an another code.
- Now you can tap on any of the functions keys on your universal remote control. If you find out that it is working fine, then that means you’ve got the correct steps. Suppose, if it doesn’t work, then you must repeat the steps and try with another code until you get paired.
How To Connect Codes For ILIVE SOUNDBAR Universal Remote Codes (Alternative Method)
The above method does not work for your Ilive soundbar universal remote then make sure to check out this alternative method once. Why because some devices might not support some functions. So check out the steps given in this alternative method.
- Find out the PROG option on your remote control and then tap down until you see the tiny LED light.
- You can select the ‘Soundbar’ option now.
- Now find out the correct soundbar code to be paired with your favorite Ilive Soundbar above and then enter them in the space for codes.
- Finally if the light goes off when you enter the code, then it shows you’re about to got the correct code.
If you’d like to know how do i program Ilive soundbar universal remote? then this Ilive soundbar manual method helps you a lot. Actually by using the desired code shall help to pair your Ilive soundbar remote. So that, by using the key code you can simply and in an easy way program your universal remote. Of course the necessary code also identifies the make and the model of the devices in use. The steps are given below.
- To begin with this method, you have to switch your device on
- After that tap TV button on the Ilive soundbar Universal Remote
- In the next step, press and hold setup button of your Ilive soundbar universal remote until you observe the light blinking. The blinking light indicates that the remote has entered into learning mode.
- Now here you have to enter the key code mentioned in the programming guide or the instructions booklet.
- After the procedure, face your remote towards the TV and press and hold the power button.
- In the final step, you can release the power button as soon as the screen will be switched to off mode.
After all of these steps, the device shall be started working correctly. Suppose, the device is getting any interruptions or not working correctly, you can pair and setup the Ilive soundbar remote control again with the same steps just by using a different code from the above-listed principles.
That’s all being said guys. I hope you all have a wonderful day and as always happy programming and happy entertaining guys. If you have any cool ideas, stories, thoughts, or any suggestions then make sure to let us know by leave a comment below in the comment section.