Terk Universal Remote Codes

Hello everyone! Welcome to my blog post and today we’re going to be taking a look at terk universal remote setup and its remote codes. With one universal remote control you can operate your all home, office or anywhere devices with one remote. So if you feel to be program and operate it with one remote control then make sure to check out the step by step article from the below lines.

So from this article what you will get! is you can easily able to program your device with remote and you will get all the useful codes such as three digit, four digit and five digit codes in order to enter into your remote and you can pair with each other. So without any further ado let’s get started our today’s topic now.

Terk Universal Remote Codes

Here we are going to mention the terk universal remote codes and you can use it like the original terk code list booklet. The codes that we are going to be mention below are being used for different brands such as vizio, lg, tcl, roku, hisense and so on. So Checkout the below table and grab the codes to connect them with your favorite universal remote control.

Brand NameRemote Codes
AOC1004, 1005, 1006, 1007, 1175, 1082, 1176, 1195, 1196, 1237.
Admiral1001, 1173, 1083, 1211
Apex1236, 1240, 1241
Broksonic1250, 1280
Citizen1004, 1006, 1008, 1171, 1038, 1016, 1105, 1196, 1132.
Curtis Mathes1000, 1004, 1006, 1015, 1049, 1105, 1073, 1171, 1196, 1212.
Daewoo1004, 1005, 1006, 1018, 1017, 1082, 1171, 1202, 1196
Daytron1004, 1006, 1171, 1196
Emerson1004, 1006, 1012, 1025, 1023, 1029, 1030, 1035, 1033, 1037, 1036,
Envision1004, 1006, 1196
Fujitsu1046, 1047
Funai1038, 1046, 1047
GE1000, 1003, 1004, 1006, 1022, 1052, 1054, 1087, 1100, 1165, 1166
GoldStar1004, 1005, 1006, 1012, 1056, 1019, 1082, 1155, 1156, 1172, 1196
Hitachi1004, 1006, 1012, 1013, 1135, 1136, 1145, 1063, 1179, 1185
Infinity1062, 1130
JVC1012, 1013, 1014, 1054, 1060, 1063, 1066, 1123, 1157, 1159
Jensen1004, 1006, 1196
LG1005, 1082
Magnavox1004, 1006, 1008, 1019, 1062, 1069, 1075, 1077, 1088, 1130
Mitsubishi1004, 1005, 1006, 1022, 1051, 1079, 1080, 1082, 1064
Motorola1003, 1173
Panasonic1003, 1054, 1130, 1062, 1160, 1350, 1351, 1214
Philco1003, 1004, 1005, 1006, 1008, 1062, 1069, 1019, 1075, 1077, 1082, 1088
Philips1003, 1004, 1008, 1019, 1012, 1062, 1068, 1069, 1075, 1088, 1087
Pioneer1004, 1006, 1136, 1185, 1179, 1196
Proscan1000, 1100, 1181, 1212, 1233
Proton1004, 1006, 1012, 1196
RCA1000, 1003, 1004, 1005, 1006, 1007, 1019, 1082, 1096, 1099, 1098
Samsung1004, 1005, 1012, 1015, 1019, 1082, 1105, 1106, 1171, 1172, 1196
Sansui1191, 1208, 1282
Sanyo1004, 1048, 1073, 1080, 1108, 1169, 1180, 1196
Scott1004, 1006, 1012, 1035, 1038, 1047, 1046, 1196
Sharp1004, 1006, 1012, 1026, 1029, 1095, 1111, 1112, 1171, 1173, 1196
Sony1002, 1205, 1216, 1218
Sylvania1004, 1006, 1008, 1019, 1062, 1068, 1075, 1076, 1077, 1088, 1130
Symphonic1033, 1038, 1189
Teknika1001, 1004, 1005, 1006, 1008, 1013, 1014, 1016, 1038, 1046, 1047, 1063
Toshiba1049, 1071, 1072, 1073, 1105, 1109, 1117, 1118, 1160, 1283
Yahama1004, 1005, 1006, 1019, 1082, 1196
Zenith1004, 1083, 1151, 1152, 1154, 1196, 1210, 1217

These are the most useful and practically tested terk universal remote codes for hisense, vizio and many more branded devices. So you just need to keep on testing on your device remotes in order to pair with each other. If you do not know how do i find the code for my universal remote? then make sure to check out the table first and then go with the programming steps from below list.

How Do I Program My Terk Universal Remote?

First of all is terk a universal remote? Yes of coruse surely it is. But the codes for this terk universal remote could be collected from many sources. It is vital aspect to note that the needed code may be changed based upon the model of the Terk remote and also the controlled device. You can check out the Remote Code Finder is a tool that can be found on the Terk website for locating the correct code for your remote’s revision number.

How Do You Manually Set up a Terk Universal Remote?

We are capable of quickly programing the terk universal remote simply using the keycode method, which is also identified the manufacturer and also the model of your equipment. So how we can manually set up the terk universal remote control. Here are our simple steps to follow along.

  • First of all you must “Turn your Device ON”
  • Select the option “TV” first from your “Terk universal remote.”
  • There after you have to tap and hold on the “Setup” button on your universal remote till the “light flash” appears (what does it mean is that the remote is in “Learning mode”).
  • Here you have to type the “Keycode” collected from the programming manual. (Instructions Booklet)
  • Once you are done with this step, you need to “point your remote at the television” and then “press and hold power” button.
  • You can release the “Power Button” when the screen turns off.

Sometimes your device does not be operating, so in that case you have to repeat the previous steps by following a different code from the same section of the reference table.


From the below steps you can learn about how to program a terk universal remote with direct code programing method. So if you’re interested in this method or want to try out this method then you’re welcome to proceed with it now.

What auto-code search does is! It normally scans one code simultaneously to get the correct remote code for pairing the control using your remote. Follow the instructions:

  • First of all “Turn Your Intelligent Equipment On” like the “TV”, which the universal remote will be controlled.
  • Tap on Device button first (TV, DVD, CBL, and OK/SEL) to “Turn on” the remote for about three seconds. The LED light indicates that the device has been prepared for connecting with it.
  • Face your remote control to the device and press the “CH+” and “CH-” buttons. The remote will be displayed on/off signals. Then you have to press the “up +” or “down -” key repeatedly until the device turns off.
  • Check the code by tap the “power” key. The device should turn on. Change the Channel to make sure the remote is appropriately programmed if it starts.
  • To save the code, tap the “device” button. The device’s LED will blink twice to confirm the stored code.


If you would like to find out the terk universal remote codes for vizio tv, for tcl, roku, lg or for any other branded devices you should be checking with the code search method which is now we are going to be writing in the below step by step method. So that you can easily find the code and then program it easily.

  • First of all, “Turn On The Device”
  • Now tap and hold the “Setup” button down.
  • Enter the three-digit code “9-9-1” and then hold down the “Power” button on the remote while pressing the Channel up buttons until the device, in this example, the television, “Turns Off.”

That’s all guys! We’ve mentioned all the appropriate codes from the above table and then we’ve mentioned all of the programing instructions in three different methods. If you’re confused then make sure to check out one method by one method until you get it right and connected.


If you still have any doubts to ask us regarding this universal remote codes then make sure to leave your comment below and we will check that your comment and make sure to reply as soon as possible if it is relevant to our topic. We don’t give any replay for any off topics. Thank you so much for checking this article guys and we appreciate your valuable time for spending on reading it.

Leave a Reply

Your email address will not be published. Required fields are marked *