Zenith Universal Remote Codes

Hello universal remote followers! are you searching for the zenith universal remote codes! would you like to know how to program this universal remote control then here is the best article that we’re going to provide you now. If you would like to program your favorite remote control then you can find two methods either use a remote code which actually works with the component that you are going to setup or else you can use the code search button on this particular remote in order to auto find a correct remote code. We usually suggests our followers to try with the remote code manually and it is the fastest way until you have the correct remote code.

In this article we are going to provide you all type of zenith universal remote control codes and also the best methods to program your favorite remote control with your interesting devices. Of course we’d also like to share one of the best methods to pair your universal remote control with your favorite devices and the method is how to program zenith universal remote without codes. So make sure to check out the full article and find out a best method whichever you need from the below given methods. So without any further ado let’s get started.

Zenith Universal Remote 3 Digit Codes

We have gathered plenty of 3 digit universal remote codes for so many devices. If you’d like to connect your devices with any of your favorite universal remote control you have to check for your device category from the given list below and then enter the code on your remote as per the below given steps.

  • Craig: 805, 906
  • Daewoo: 002, 102, 110, 203, 214, 221, 303, 311, 314
  • Emerson: 002, 003, 004, 005, 006, 014, 104, 105
  • Fisher: 506, 606, 619, 902
  • Fujitsu: 206
  • Funai: 206, 805, 906
  • GE: 002, 007, 018, 107, 310, 318, 502, 601, 719, 803
  • Goldstar: 002, 102, 117, 207, 217, 307, 502, 713, 818, 916
  • Hitachi: 002, 016, 116, 218, 310, 315, 415, 502, 507, 516, 619
  • JVC: 007, 108, 208, 308, 417, 502, 510, 617, 606, 702, 902
  • Magnavox: 002, 008, 109, 118, 209, 309, 402, 408, 502, 508, 510
  • Memorex: 102, 502, 506, 601, 701
  • Mitsubishi: 002, 102, 114, 206, 502, 509, 510, 619, 709, 803
  • Panasonic: 017, 516, 618, 807, 901
  • Philips: 002, 009, 109, 202, 209, 221, 310, 402, 408, 502, 508
  • Proscan: 601, 719
  • RCA: 002, 102, 211, 302, 320, 402, 406, 411, 502, 511, 514
  • Samsung: 002, 102, 103, 112, 212, 502, 512, 702, 818, 908
  • Sansui: 215
  • Sanyo: 002, 312, 412, 506, 619, 902
  • Sharp: 002, 013, 111, 502, 712, 812, 813, 918
  • Sony: 202, 801
  • Sylvania: 002, 009, 109, 117, 209, 309, 402, 408, 502, 508, 717
  • Symphonic: 117, 520, 904, 906
  • Toshiba: 112, 313, 413, 506, 510, 512, 902
  • Zenith: 008, 117, 311, 405, 407, 512, 601, 701, 713, 916

The above mentioned zenith remote control programming methods which are given above shall be applicable to the following model number remotes only: ZEN100, ZEN300, ZEN350, ZEN400, ZEN425, ZEN450, ZEN500, ZEN525, ZEN700, ZEN725, ZEN800 and ZEN900.

Of course we have some extra codes which can be used for all devices and the codes are as followed: 101, 142, 149, 177, 201, 224, 225, 229, 237, 153, 154, 172, 401, 460, 461, 498, 501, 502, 521.

Zenith Universal Remote 4 Digit Codes

Do you need zenith 4 digit remote codes to pair your device with your favorite universal remote control then please check out the below given codes one by one and then enter them on to your remote so that at one code you will have to stop when it indicates you to be paired with your device. So check out one by one as per the programming method and then you can enjoy all of your favorite shows with one remote.

Zenith – One-For-All Universal Remote Codes

  • 0131
  • 0009
  • 0138
  • 0111
  • 0091
  • 0134
  • 0078
  • 0059
  • 0038
  • 0050
  • 0153
  • 0121
  • 0004
  • 0064

Magnavox Universal Remote Codes List For Zenith

  • 0015
  • 0077

Philips Universal Remote Codes For Zenith

  • 0903
  • 0713
  • 0606
  • 0710
  • 0826
  • 0326
  • 0407
  • 0505
  • 0126
  • 0916
  • 0405
  • 0430
  • 0228
  • 0502
  • 0507
  • 0701
  • 0435
  • 0437
  • 0002
  • 0714
  • 0712
  • 0324
  • 0632
  • 0015
  • 0008
  • 0409
  • 0415
  • 0115
  • 0224

GE Universal Remote Codes List For Zenith

  • 0138
  • 0245
  • 0004
  • 0288
  • 0058
  • 0121
  • 0001
  • 0038
  • 0247
  • 0039
  • 0266
  • 0134
  • 0091
  • 0153
  • 0078
  • 0227
  • 0111
  • 0009
  • 0131
  • 0252
  • 0226
  • 0310
  • 0050
  • 0338
  • 0023
  • 0358
  • 0059
  • 0135
  • 0064

RCA Universal Remote Codes List For Zenith

  • 1152
  • 1153
  • 1428
  • 1449
  • 1463
  • 1464
  • 1000
  • 1001
  • 1154
  • 1196
  • 1210
  • 1217
  • 1424
  • 1427
  • 1004
  • 1051
  • 1083
  • 1151

How To Program Zenith Universal Remote Without Codes

If you do not know the zenith universal remote codes for vizio or any of your favorite devices then you can still program without using codes. So instead of using the codes here we shall use auto search method. Of course all of the universal remote codes are being gone through the scanning procedure in a specific remote. In that procedure it scans one code simultaneously in order to find out the correct remote code which works along with your remote to be paired the control. You can check out the below steps.

  • Make sure to “Turn On” smart device such as “TV” that you would like universal remote to operate.
  • Now you have to “Turn On” your remote then tap on the device button such as (TV, DVD, CBL and OK/SEL) for upto 3 seconds. After that the LED light will blink that means it indicating the device is ready to program.
  • There are after you need to point out your remote to the device and then click on “CH+” & “CH-“ switches. After that remote shall show on/off indicators. Now click “up” or “down” key continuously as soon as the device will turn off.
  • Now you need to verify the code by click on the “power” key to confirm. So the device must be Turn On. So if it starts, you have to try for changing the channel in order to confirm that the remote is programmed in a correct way.
  • Finally tap on the “Device” Button so that it will save the code. The device LED will blink twice for confirming the code saved.

This is how you can program your favorite universal remote control with your existing remote control by using the zenith universal remote no code search button. We hope these steps helped you a lot in order to program your device remote with your favorite remote control.

How to Program Zenith Remote Control With Code Search

Have you tried and tired in searching for your key code which works for your device so at that particular time you could setup your universal remote to the search mode for a correct one. Its the code in the manual which basically forces your remote into the search mode. So once checkout the code search method below,

  • Firstly “Turn Your Device On
  • There after you have to press and hold the “Setup” button on your remote
  • After that simply enter a common 3 digit code “9-9-1
  • Now on your remote hold on the “Power Button” and then click on “CH+” until your device in this case your tv “Turns Off”

Of course the above provided method may take some extra time but it is mandatory in order to find out your key code. Once you’re done with the above mentioned zenith universal remote control instructions then your remote control should be working for all functions.

How To Program Zenith Remote Control With Manual Method

With the help of keycode we are simply able to program the universal remote and also the keycode shall identify the make and model of your equipment. Once check out the steps given below.

  • Turn Your Device On
  • Click the “TV” on your “Zenith universal remote
  • Press and Hold Setup Button” of your universal remote until it shows the Light Flash (That means it still is in Learning mode only)
  • Now enter a “Keycode” which you’ve already gathered from the programming guide (instructions booklet)
  • After you’ve done with it you need to “point your remote at the TV” and then “Press And Hold The Power” button
  • Whenever the screen switches off that time you can release “Power Button”

After all these instructions you followed from above, your TV works without any interruptions now with the universal remote control. But if your device isn’t working yet then you must try to repeat the above procedure as it is but with a different code from the reference table of the same part.

Conclusion

That being said! If you have faced any issues while programming your favorite Zenith universal remote control then feel free to leave a comment beneath in the comments section by mentioning your issue so that we can help you instantly. If you have any other codes which are helpful to this remote then proceed to share with us and we will try to include it in this post. Thank you for your support everyone.

Leave a Reply

Your email address will not be published. Required fields are marked *